B205D BMW Fault Code

Description:

Catalytic converters must be warm before they can work properly. On a cold start the PCM provides a rich mixture to keep the cold engine running.
All that extra fuel goes into the catalytic converter. But the exhaust isn't very hot, because, ah, the engine is pretty cold. GM has employed several strategies to fire up the catalytic converter quicker and reduce cold start emissions. One way is to use a secondary air pump that pumps outside air directly into the catalytic converter.

B205D Code Symptoms :

There are currently two main types of cylinder deactivation used today, depending on the type of engine. B205D code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

Diagnosis And Repairing B205D

B205D OBD 2 code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.

How to fix B205D code ?

• Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
• Ignition misfiring
• Fuel tank leaking

Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code B205D, so consult the manual to locate the brake fluid reservoir.

Bear in mind that a low fluid level can set code B205D on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.